K2 Dome 6 System
- Aerodynamic and ballast-optimised system based on the latest wind tunnel standards
- Secure anchoring with fixed connection for roofs < 10° and low load reserves
- Component-optimised system
K2 Dome 6 System
System variant
- 4 assembly steps for super-fast installation
- Time-saving alignment of the rails with the Dome Speed Spacer gauge
- Snap-in system for peaks and tool-free rail connectors
- Flexible row spacing
- Suitable for foil, bitumen, gravel and green roofs
- Suitable for additional elevation on trapezoidal sheeting
- For mounting on the long module side
- For module sizes up to 2390 × 1170 mm
- Based on Dome 6 Classic
K2 Dome 6 System
Technical data
| D-Dome 6.10 | S-Dome 6.10 | |
|---|---|---|
| Area of application | Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs | Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs |
| Fastening type/roof fixture |
|
|
| Requirements |
|
|
| Technical specifications Base rail |
|
|
| Technical specifications Module row |
|
|
| Minimum distance to the edge of the roof | 600 mm | 600 mm |
| Inclination angle | 10° | 10° |
| Material |
|
|
K2 Dome 6 System
Downloads
Product brochure
General Assembly and Maintenance Instructions
Assembly instructions - D-Dome 6 Xpress + Classic
Assembly instructions - D-Dome 6 Classic LS
Assembly instructions - D-Dome 6 on trapezoidal sheet metal with BasicRail System
Assembly instructions - S-Dome 6 on trapezoidal sheet metal with BasicRail System
Assembly instructions - S-Dome 6 Xpress
Assembly instructions - S-Dome 6 Classic
Assembly instructions - S-Dome 6 Classic LS
Assembly instructions - MultiRail with S-Dome 6 elevation
Assembly instructions - PE plates and walkway slabs
Checklist - Flat roof
Module approval flat roof systems: Dome 6
D-Dome 6.10 L Xpress
D-Dome 6.10 Classic
D-Dome 6.10 Classic on PE-Plate
D-Dome 6.10 Classic on trapeze
D-Dome 6.10 Classic with RailUp
D-Dome 6.10 Classic on concrete block
D-Dome 6.10 Classic LS
D-Dome 6.10 Classic LS on PE-Plate
D-Dome 6.10 Classic LS on trapeze
D-Dome 6.10 Classic LS with RailUp
D-Dome 6.10 Classic LS on concrete block
K2 Dome 6 System
Videos
K2 Dome 6 System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.