Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 5.95 m. Material: Aluminium EN AW-6063 T66

Pre-assembled base rail set for the D-Dome 6.15 system for module widths of 960-1170 mm. Including BasicRail 2.48 m, Dome SD, EndPlate and Mat S. Material: aluminium, EPDM, stainless steel

Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 5.95 m. Material: Aluminium EN AW-6063 T66

Pre-assembled basic rail set for the S-Dome 6.10 system for module widths of 1061-1170 mm. Includes BasicRail 1.50 m, Dome SD, EndPlate and Mat S. Material: Aluminium, EPDM, stainless steel

Pre-assembled basic rail set for the D-Dome 6.10 system for module widths of 1061-1170 mm. Includes BasicRail 2.48 m, Dome SD, MidPlate and Mat S. Material: Aluminium, EPDM, stainless steel

Pre-assembled basic rail set for the S-Dome 6.15 system for module widths of 1061-1170 mm. Includes BasicRail , Dome SD, EndPlate and Mat S. Material: Aluminium, EPDM, stainless steel

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: Aluminium EN AW-6063 T66

Mounting rail set for K2 Buddy installation. This set contains two BasicRail rails with a length of 1.30 m as well as a stiffening profile for mounting on the module frame with a length of 1.30 m. The two additional BasicRail mounting rails are essential for mounting the K2 Buddy. The stiffening profile is designed to stabilise and reinforce the frame construction.

Mounting rail set for K2 Buddy mounting. This set contains two BasicRail rails with a length of 1.30 m and two square profiles, also 1.30 m long. The two additional BasicRail mounting rails are essential for mounting the K2 Buddy. The square profiles are designed to stabilize and reinforce the frame construction.

The K2 Buddy - BaseBox Set consists of a top-hat rail housing with integrated circuit board and a top-hat rail power supply unit. It is installed in the connection room of the building services, protected from the weather. The BaseBox monitors the measurement data of the TopBox on the roof at regular intervals (every 10 minutes) and transmits it to the cloud via the house Internet connection. It also monitors the power supply to the TopBox and switches it off in the event of a fault to ensure smooth operation. The following additional sets are required to install the K2 Buddy in combination with the Dome 6 system:1000003 K2 Buddy - TopBox Set Snow2003448 K2 Buddy - Dome Profile Set2003603 K2 Buddy - Dome accessories Set

The Dome Accessories Set offers all the necessary accessories and small parts to safely install the TopBox Set Snow in the K2 Dome flat roof systems. Among other things, it includes an aluminum plate that supports the snow sensor units and securely connects the BasicRails. In addition, it contains specific module stops for precise measurement data acquisition as well as lift-off protection and cable managers to ensure a reliable installation. To install the K2 Buddy in combination with the Dome 6 system, the following additional sets are required: 1000003 K2 Buddy - TopBox Set Snow 1000097 K2 Buddy - BaseBox Set 2003448 K2 Buddy - Dome Profile Set

The K2 Buddy - TopBox Set Snow contains two snow sensor units that precisely measure the snow load on a PV module. These sensors are installed with the Dome 6 system using components from the Dome Accessories Set and are permanently connected to the TopBox (plastic housing with encapsulated circuit board) by cable. The snow sensors are positioned on the left and right below the bottom corners of a PV module. The TopBox evaluates the measured values and transmits them by cable to the K2 Buddy - BaseBox in the building services. The power supply (24 V) is also provided via the same cable. The following additional sets are required to install the K2 Buddy in combination with the Dome 6 system: 1000097 K2 Buddy - BaseBox Set 2003448 K2 Buddy - Dome Profile Set 2003603 K2 Buddy - Dome Accessories Set

Mat S Support Pad. Flexible function to absorb tolerances and protect the roof cover. Suitable for K2 BasicRail. Material: EPDM

Rail connector set as connecting element between two K2 SingleRails 36. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2

Rail connector set as connecting element between two K2 Dome 6 Base Set. Including accessories and equipotential bonding. Material: Aluminium, stainless steel

Rail connector set as connecting element between two K2 BasicRail 22 or FlatRail. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2.

Rail connector set as connecting element between two K2 SingleRails 50. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2

Top beam for the TiltUp Vento system. Material: aluminium EN AW 6060 T66; length: 2.36 m

Component for the module elevation of the Dome 6.15 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66

Brace for the GreenRoof Vento system. Length: 332 mm. Material: Aluminium EN AW 6060 T6

Back brace for the TiltUp Vento system. Material: aluminium EN AW 6060 T6; length: 558 mm

For the connection between the concrete foundation and the TiliUp Vento Brace. Material: Aluminium EN AW 6063 T66

Component for the roof-parallel module elevation of the Dome Zero system. The peak is fixed to the BasicRail with a socket head screw and MK2. Material: Aluminium EN AW-6063 T66

Front module support element for the Dome 6.10 system. Material: aluminium

The GreenRoof Foot serves as a connecting element between the BasicRail and two GreenRoof Braces. Material: Aluminium EN AW 6063 T66

Component for the module elevation of the Dome 6.10 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66

Front module support element for the Dome 6.15 system. Material: aluminium

Top beam for the GreenRoof Vento system. Length: 1.00 m. Material: aluminium EN AW 6060 T66

Support 15° for the MultiAngle System. Dimensions: 60x40x4 mm. Length: 320 mm.

Top flange with drillings to place module vertical or horizontal. Aluminium 60x40x4 mm, length 1.450 mm

Universal module end clamp for fixing solar modules with frame heights of 25-37mm. Not compatible with the K2 Dome 6 System.

Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.

Universal module end clamp for fixing solar modules with frame heights of 30-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, Badamid B70, stainless steel A2

Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM

Wind brace for the K2 MultiAngle system. Aluminum L-profile 30x30x3, 1.50m.

Universal module middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM

Black anodized universal middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Anodized aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.

Black anodized universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.

Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System incl. TerraGrif K2MI Duo. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)

Mounting accessories for DomeClamp Moduleclamp establishing equipotential bonding of the K2 Dome 6 mounting system or for earthing the module frames.

Universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)

Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)

Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.

Black anodized universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.

K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.10 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.15 System. Suitable for module lengths 1799 mm - 2150 mm. Material: Steel with Magnelis ZM310 coating

K2 Windbreaker to deflect wind on the backs of the K2 S-Dome 6.15 Classic LS system. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)