K2 TiltUp Vento System
Filter
m -
m
m -
m
- Home
- Mounting systems
-
Flat roof systems
- K2 TiltUp Vento System
K2 TiltUp Vento System
SingleRail 36
Product number:
2004260
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 5.95 m. Material: Aluminium EN AW-6063 T66
SingleRail 36; 4.80 m Black
Product number:
2004396
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport.
SingleRail 50; 4.80 m
Product number:
2004414
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4.80 m. Material: Aluminium EN AW-6063 T66
Rail connector Set SingleRail 36
Product number:
2001976
Rail connector set as connecting element between two K2 SingleRails 36. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2
Rail connector Set SingleRail 50
Product number:
2002404
Rail connector set as connecting element between two K2 SingleRails 50. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2
TiltUp Vento Beam
Product number:
2003261
Top beam for the TiltUp Vento system. Material: aluminium EN AW 6060 T66; length: 2.36 m
TiltUp Vento Brace
Product number:
2003268
Back brace for the TiltUp Vento system. Material: aluminium EN AW 6060 T6; length: 558 mm
TiltUp Vento Foot
Product number:
2003271
For the connection between the concrete foundation and the TiliUp Vento Brace. Material: Aluminium EN AW 6063 T66
K2 Clamp MC 25-40 mm
Product number:
2004146
Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System.
K2 Clamp EC 30-40, Hybrid
Product number:
2003451
Universal module end clamp for fixing solar modules with frame heights of 30-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, Badamid B70, stainless steel A2
Universal End Clamp OneEnd
Product number:
2002514
Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM
Universal Middle Clamp OneMid 30-42 mm
Product number:
2003071
Universal module middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Universal Middle Clamp OneMid 30-42 mm, black anodized
Product number:
2003072
Black anodized universal middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Anodized aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Universal End Clamp OneEnd, black anodized
Product number:
2002589
Black anodized universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
BlackCover SingleRail 36
Product number:
2003523
K2 BlackCover for black covering of the rail ends of the K2 SingleRail 36 and K2 SingleRail 36 light. Length of the cover: 150 mm.
Multi Monti plus SS' - concrete fastner 7,5x60
Product number:
2003293
‘Multi Monti plus’ (Heco) - screw anchor for concrete 7,5x60 hexagon head with combined washer. The certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Material: carbon steel bright zinc plated, A2K
Spring plug for TiltUp Vento
Product number:
2001196
Spring plug DIN 11024. Material: Stainless steel A2-AISI304
TiltUp Vento Pin
Product number:
2004241
Pin for connecting the TiltUp Vento profiles. Material: 1.4301 (X5CrNi18-10) TS520
EndCap for SingleRail 36
Product number:
1004767
K2 End Cap for K2 SingleRail 36, SingleRail 36 ight and CrossRail 36. Material: glass fibre reinforced polyamid
AddOn 30
Product number:
2001707
The K2 AddOn 30 mounting adapter enables grid or shared-rail installation without additional rails or clamps for module frame heights of 30-34 mm. Fits most K2 SolidRails, CrossRails, SingleRails and
BasicRail
. Not suitable for CrossRail 62 & 90 and SolidRail Alpin & XL. Material: glass fibre reinforced polyamide
AddOn 22/25
Product number:
1005530
The K2 AddOn 22 mounting adapter enables grid or shared-rail installation without additional rails or clamps for module frame heights of 35-50 mm. Fits all K2 SolidRails, CrossRails, SingleRails and BasicRails. Material: glass fibre reinforced polyamide
TerraGrif QL
Product number:
2004231
Mounting accessories for establishing equipotential bonding of the K2 mounting systems or for earthing the module frames. Compatible moduleclamp: K2 Clamp 25-40.
TerraGrif K2SZ
Product number:
2001881
Mounting accessories for establishing equipotential bonding of the K2 mounting systems or for earthing the module frames. Incompatible systems:
BasicRail
(landscape mounting). Material: stainless steel 301 TA
Module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Black anodized module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA. Eloxal may show slight scratches as a result of packaging and transport.
Module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Alternative item: 2004393
Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 4,40 m. Material: Aluminium EN AW-6063 T66
Black anodized module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA.
- Home
- Mounting systems
-
Flat roof systems
- K2 TiltUp Vento System
K2 TiltUp Vento System
Many different module arrangements, suitable for larger modules and 3 different elevation angles: 20°, 25° and 30°.
Various roof connections
- Ballasted with concrete foundation: for almost every flat roof
- Direct connection with concrete anchors possible
3 different elevation angles
- All module arrangements in 3 elevation angles available: 20°, 25° and 30°
- Component connections identical throughout
Different module layouts
- Portrait/landscape possible
- Clamping on the short or long side
Few components
- Refined system with well thought-out connections
- Enables systemic storage and flexible application possibilities

- Home
- Mounting systems
-
Flat roof systems
- K2 TiltUp Vento System
K2 TiltUp Vento System
- Home
- Mounting systems
-
Flat roof systems
- K2 TiltUp Vento System
K2 TiltUp Vento System
Technical data
TiltUp Vento System | |
---|---|
Scope of application | Flat roofs ≤ 3° on concrete, gravelled or green roofs |
Fastening type / roof fixture |
|
Requirements |
|
Technical specifications | Thermal separation after a maximum of 15,5m |
Inclination angle | 20° / 25° / 30° |
Material |
|
- Home
- Mounting systems
-
Flat roof systems
- K2 TiltUp Vento System
K2 TiltUp Vento System
Downloads
Tender specification - TiltUp Vento
- Home
- Mounting systems
-
Flat roof systems
- K2 TiltUp Vento System
K2 TiltUp Vento System
Video
- Home
- Mounting systems
-
Flat roof systems
- K2 TiltUp Vento System
K2 TiltUp Vento System

K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.