K2 Dome Classic System
Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 5.95 m. Material: Aluminium EN AW-6063 T66
Building protection mat Dome SD 160x180 18mm
Product number:
2001740
Building protection mat Dome with locking lugs. Is clamped under the K2 SpeedRail at the position of the K2 Dome SD to protect the roof foil. Dimensions: 160x180x18 mm, Material: PUR-bound rubber granulate
Building protection mat Dome 470x180 18mm
Product number:
2001696
Building protection mat Dome with locking lugs. Is clamped under the K2 SpeedRail at the position of the K2 Dome 1000 to protect the roof foil. Dimensions: 470x180x18 mm, Material: PUR-bound rubber granulate
Building protection mat Dome Alu 470x180 18mm
Product number:
2001695
Building protection mat Dome with aluminium lamination and locking lugs. Is clamped under the K2
BasicRail
at the position of the K2 Dome 1000 to protect the roof foil. Dimensions: 470x180x18 mm, Material: PUR-bound rubber granulate (laminated with aluminium triplex film)
Building protection mat Dome SD Alu 160x180 18mm
Product number:
2001739
Building protection mat Dome with aluminium lamination and locking lugs. Is clamped under the K2
BasicRail
at the position of the K2 Dome SD to protect the roof foil. Dimensions: 160x180x18 mm, Material: PUR-bound rubber granulate (laminated with aluminium triplex film)
Dome FlatConnector Set
Product number:
1006039
Rail connector set as connecting element between two K2
BasicRail
22 or FlatRail. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2.
Dome SD
Product number:
2001968
Module support element for dome flat roof systems. Material: Aluminium EN AW-6063 T66
D-Dome
Product number:
2001962
Module elevation element for double flat roof system D-Dome. Material: aluminium EN AW-6063 T66
S-Dome
Product number:
2001967
Module elevation element for flat roof system K2 S-Dome. Material: Aluminium EN AW-6063 T66
Universal End Clamp OneEnd
Product number:
2002514
Universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM
Universal Middle Clamp OneMid 30-42 mm
Product number:
2003071
Universal module middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM
Universal Middle Clamp OneMid 30-42 mm, black anodized
Product number:
2003072
Black anodized universal middle clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Anodized aluminium EN AW 6063 T66 / EN AW 6082 T6 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Universal End Clamp OneEnd, black anodized
Product number:
2002589
Black anodized universal module end clamp with simple "click function" for fixing solar modules with frame heights of 30-42 mm. Not compatible with the K2 Dome 6 System and K2 FlatRail, SolidRail L/ LS /XL and CrossRail 62/ 90. Material: Aluminium EN AW 6063 T66 / A2 / POM. Eloxal may show slight scratches as a result of packaging and transport.
Washer 8.4x30x1.5
Product number:
1000273
Diameter washer DIN 9240-A2-8,4x30x1,5. Material: stainless steel
S-Dome Classic Windbreaker
Product number:
2002732
K2 Windbreaker for wind deflection on the reverse side of the K2 Dome S1000 System. Length: 2080 mm. Material: Aluminium EN AW 5754 H22/H32
S-Dome Classic Windbreaker
Product number:
2003167
K2 Windbreaker for wind deflection on the reverse side of the K2 Dome S1000 System. Length: 1757 mm. Material: Steel with Magnelis coating
Ballast tray for a fast and universal bearing of different ballasts slabs. Used for K2 Dome 6 systems. Suitable for module lengths from 2048– 2405 mm. Total length Porter: 2450 mm; Maximum permissible ballast: 148 kg. Material: Aluminium EN AW 6063 T66
Dome SpeedPorter
Product number:
2002300
For ballast mounting for the K2 Dome 6 Classic flat roof system. Place two SpeedPorters at a distance from each other, depending on the size of the bricks, on the
BasicRail and place ballast (up to approx. 40 kg) on them. Material: aluminium
MK2 insertion nut with clip, Stainless steel
Product number:
1001643
The Fast-installation MK2 insertion nut can be put into the K2 rail everywhere. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: stainless steel 1.4301, PA.
MK2 Slot nut with clip, Aluminum
Product number:
2000034
The Fast-installation M K2 slot nut can be put into the K2 rail everywhere*. The slot nut will adjust itself in the the rail and can be readjusted to every place of the rail. Material: Aluminium, PA. * excluding MiniRail, MicroRail, Dome 6 and Dome V Peak
Hexagonal socket head cap screw M8x20
Product number:
2001729
Hexagon socket head cap screw M8x20 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2
PVX Multimount
Product number:
2003137
The UV-resistant PVX Multimount provides a multifunctional cable management system for mesh tray and/or pipes on flat roofs and is made from 80% recycled plastic. Mesh tray and/or pipes are not included. Material: PE and ASA
Flatroof cable routing Performa Mesh Tray 70x100x3000
Product number:
2004054
Performa mesh tray for cable management on the flat roof. Compatible with the PVX Multimount (2003137). Dimensions (LxWxH): 3000 x 100 x 75 mm. Wire diameter: 3,9 mm. Material: steel (zinc+)
Performa Mesh Tray Connector
Product number:
2004055
Performa mesh tray connector for article 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. Material: spring steel (zinc)
Dome Speed Spacer Large
Product number:
2004129
Distance tool for the K2 Dome system. Length: 2,50 m. Material: Aluminium, Acromide
Test weight for measuring the coefficient of friction
Product number:
2002620
Test weight for measuring the coefficient of friction on a roof.
Module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Black anodized module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA. Eloxal may show slight scratches as a result of packaging and transport.
Module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA
Alternative item: 2004278Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 4.40 m. Material: Aluminium EN AW-6063 T66
Black anodized module middle clamp XS set for fixing solar modules with frame heights 30-33 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA.
K2 Dome Classic System
Assembly-friendly classics thanks to the use of fewer components. Available elevated on one/two sides.
- Is suitable for nearly all types of flat roofs. It is very easy to install using fewer K2 System components
- A system for statically difficult roofs and special applications
- Can also be mounted on trapezoidal sheet metal roofs
- Quick and easy handling
K2 Dome Classic System
K2 Dome Classic System
Technical data
| D-Dome | S-Dome | |
|---|---|---|
| Scope of application | Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs; also trapezoidal sheet metal roofs with continuous mounting rails | Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs; also trapezoidal sheet metal roofs with continuous mounting rails |
| Fastening type / roof fixture | Ballasted; no roof penetration for inclination ≤ 3° | Ballasted; no roof penetration for inclination ≤ 3° |
| Requirements |
|
|
| Technical specifications |
|
|
| Inclination angle | 10° | 10° |
| Material |
|
|
K2 Dome Classic System
Downloads
K2 Dome Classic System
Videos
K2 Dome Classic System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.