K2 MicroRail System
MicroRail 25
Product number:
2003199
Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Only compatible with the K2 DomeClamp. Length: 242 mm. Material: Aluminium EN AW-6063 T66, EPDM
MicroRail CSM 25 Set
Product number:
2001427
Short rail set with static confirmation in K2 Base. For direct mounting in landscape orientation on corrugated sheet metal covering with a radius of 22-45 mm. Only compatible with the K2 DomeClamp. Length: 242 mm. Material: Aluminium EN AW-6063 T66, EPDM
MicroRail CSM 10 Set
Product number:
2003214
Short rail set with static confirmation in K2 Base. For direct mounting in landscape orientation on corrugated sheet metal covering with a radius of 22-45 mm. Only compatible with the K2 DomeClamp. Length: 92 mm. Material: Aluminium EN AW-6063 T66, EPDM
MicroRail 10
Product number:
2003198
Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Only compatible with the K2 DomeClamp. Length: 92 mm. Material: Aluminium EN AW-6063 T66, EPDM
DomeClamp End Clamp 30-50 mm
Product number:
2002559
Universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
DomeClamp Middle Clamp 30-50 mm
Product number:
2002558
Universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301)
DomeClamp Middle Clamp 30-50 mm, black anodized
Product number:
2002609
Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.
DomeClamp End Clamp 30-50 mm, black anodized
Product number:
2002610
Black anodized universal end clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport.
Thread-tapping screw 6x38 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.4 mm to 1.25 mm. With General approval. Certification: abZ (de), abZ (de)
BasicClip
, ETA (eu), MCS (gb). Material: stainless steel A2, EPDM
K2 MicroRail System
Fixing in the roof covering with self-tapping screws including sealing and without additional parts.
The MicroRail System is a mounting system for corrugated and trapezoidal sheet metal roofs. The short rail system including sealing is fixed directly into the roof covering without additional parts with self-tapping sealing screws. The PV modules are mounted in landscape orientation.
The rail channel is designed for the universal MiniClamp module clamp and is therefore suitable for most module frame heights. In addition module frame grounding can be very easily established using the Terragrif K2MI for the MiniClamp.
- No fastening in the purlins, therefore fewer roof parameters have to be determined
- Quick and easy mounting on corrugated sheet metal using an adapter and directly on trapezoidal sheet metal
- Only two rail lengths for all load cases
K2 MicroRail System
Scope of application
With corrugated sheet roofs, pre-drilling and time-consuming fixing in the roof substructure is no longer necessary.This makes the roof connection of PV systems on corrugated sheet metal roofing just as quick and easy as with our well-known trapezoidal sheet metal systems.
The MicroRail uses the same module clamps as the Dome systems. This means that all commercial roofs can be realized with one type of clamp. For corrugated iron roofs the MicroRail is used as a set with the CSM adapter. Without the corrugated sheet metal adapter it can be installed directly on the trapezoidal sheet metal – just like our MultiRail system.
K2 MicroRail System
Technical data
| MicroRail System | |
|---|---|
| Scope of application |
Pitched roofs with corrugated/trapezoidal sheet metal or sandwich panels Roof inclination: 5 - 75° |
| Fastening type / roof fixture | Screws in roofing with self-tapping thin sheet screws |
| Requirements |
|
| Module orientation | Horizontal |
| Material | Aluminium (EN AW-6063 T66 / EN AW- 6082 T6); EPDM |
| Dimensions W×H×L [mm] |
|
* The project-specific minimum high crest width dimension can be found in the Base report.
K2 MicroRail System
Downloads
K2 MicroRail System
Videos
K2 MicroRail System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.